3 Items in your cart 
aluminum diamond plate load tables
-1369 items in stock
aluminum diamond plate load tables also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in ...
More DetailsProduct Information
aluminum diamond plate load tables
Surface Finish: Bright finish, Mill finish
Pattern type: Small five bar,Big five bar,Diamond
Thickness:1.5~4.5mm
Width:1000~1600mm
Length:2000~4000mm
aluminum diamond plate load tables, aluminium checkered plate, diamond aluminum tread plate, checquered aluminum sheet/coil,
size: 4x8 foot
thickness:2-6mm;
alloy: 1050/1060/3003/5052/5754/6061
aluminum diamond plate load tables is available in a wide array of thicknesses from .063” (1/16”) to .500 (1/2”). We see .125” or 1/8” being the most common size as it provides some rigidity. Common alloys for aluminium checker plate are 3003 and 6061
we can supply one bar, three bars, five bars, and diamond aluminum checker plate, aluminum diamond plate load tables, aluminum chequered plate from falls on 1 series, 3 series, 5 series and 6 series, widely used in vehicle and ship manufacturing, machinery manufacturing, transportation and storage, construction and decoration, aerospace and other industries.. and thickness from 0.2-8.0mm, and the coil type even can be up to 2650mm.
Sizes range for aluminum diamond plate load tables
| Alloy | Temper | Size range (mm) | ||
| Thickness | Width | Length | ||
| 1050A, 1200 |
F | 1.5-2.4 | 800-1500 | 1000-6000 |
| 2.0-6.0 | 800-1500 | 1000-8000 | ||
| F, H114 | 1.5-2.0 | 900-1600 | 1000-4000 | |
| 2.0-8.0 | 900-2000 | 1000-9000 | ||
| 5251, 5052, 5754 |
H114, H224 | 1.5-2.4 | 800-1500 | 1000-6000 |
| 2.4-6.0 | 800-1500 | 1000-8000 | ||
| F, H114,H224 | 1.5-2.0 | 900-1600 | 700-4000 | |
| 2.0-7.0 | 900-2000 | 1000-9000 | ||
| F, H114 | 7.0-8.0 | 900-2000 | 1000-9000 | |
| 5154A | F, H114 | 2.0-6.0 | 900-1600 | 1000-9000 |
| 5086,5083 | F, H114, H224, H116 |
2.0-6.0 | 900-1600 | 1000-9000 |
| 6061, 6082 |
F, 0, T4, T6 | 1.5-2.0 | 900-1250 | 700-4000 |
| 2.0-3.5 | 900-1600 | 1000-4000 | ||
| F, 0 | 2.0-3.5 | 1600-2000 | 1000-4000 | |
| F, 0, T4, T6 | 3.5-4.83 | 900-1250 | 1000-4000 | |
| 3.5-4.83 | 1250-2000 | 1000-4000 | ||
| F, 0 | 4.83-6.35 | 900-2000 | 1000-4000 | |
| 3003 | H224 | 1.5-2.0 | 800-1524 | 1000-4000 |
| 2.0-2.4 | 800-1524 | 1000-6000 | ||
| 2.4-6.35 | 800-1524 | 1000-8000 | ||
Sizes range for aluminum diamond plate load tables
|
Alloy
|
Temper
|
Size range (mm)
|
|||
|
Thickness
|
Width
|
Diameter
|
|||
|
Inside
|
Outside
|
||||
| 5251, 5052, 5754 |
H114, H224 | 1.5-3.0 | 800-1500 | 500, 610 | Max.1600 |
| 3.0-6.0 | 800-1500 | 750 | Max.1600 | ||
| F, H114, H224 | 3.0-7.0 | 1250-2000 | 600 | Max.1800 | |
| F, H114 | 7.0-8.0 | 1250-2000 | 600 | Max.1800 | |
| 5154A, 5086, 5083 |
F, H114 | 3.0-6.0 | 1250-2000 | 600 | Max.1800 |
| 1050A, 1200, 3003 |
F, H114 | 3.0-8.0 | 1250-2000 | 600 | Max.1800 |
| 3003 | H224 | 1.42-3.1 | 800-1524 | 500, 610 | Max.1600 |
Chemical Properties(WT.%)
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | impurities | Al | note |
| 1050 | <0.25 | <0.40 | <0.05 | <0.05 | <0.05 | <0.05 | <0.03 | Other, each 0.03 | >99.5 | V<0.05 | |
| 1060 | <0.25 | <0.35 | <0.05 | <0.03 | <0.03 | <0.05 | <0.03 | Other, each 0.03 | >99.6 | V<0.05 | |
| 1070 | <0.20 | <0.25 | <0.04 | 0.03 | 0.03 | 0.04 | 0.03 | Other, each 0.03 | >99.7 | V<0.05 | |
| 1100 | Si +Fe <0.95 | 0.05-0.20 | <0.05 | <0.10 | Other, each 0.03 | >99.00 | V<0.05 | ||||
| 3003=АМц | <0.6 | <0.7 | 0.05-0.20 | 1.0-1.5 | <0.10 | Other,each 0.05, total 0.15 | |||||
| 3004 | <0.30 | <0.7 | <0.25 | 1.0-1.5 | 0.8-1.3 | <0.25 | Other,each 0.05, total 0.15 | ||||
| 3105 | <0.6 | <0.7 | <0.30 | 0.30-0.8 | 0.20-0.8 | <0.20 | <0.4 | <0.10 | Other,each 0.05, total 0.15 | ||
| 5052=АМг2.5 | <0.25 | <0.40 | <0.10 | <0.10 | 2.2-2.8 | 0.15-0.35 | <0.10 | Other,each 0.05, total 0.15 | |||
| 5083=АМг4.5 | <0.40 | <0.40 | <0.10 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | <0.25 | <0.15 | Other,each 0.05, total 0.15 | ||
| 6061=АД33 | 0.40-0.8 | <0.7 | 0.15-0.40 | <0.15 | 0.8-1.2 | 0.04-0.35 | <0.25 | <0.15 | Other,each 0.05, total 0.15 | ||
Tag
aluminum diamond plate load tables,aluminum,diamond,plate,load,tables
aluminum diamond plate outlet covers
New | aluminum diamond plate
aluminum diamond plate outlet covers Supplied at Affordable Prices. Non-slip, Cost Effective. Also Known as Vastrap, Diamond Plate, Checkered Plate ...
View Details
Hot sale factory price aluminum checker plate aluminum diamond plate
New | aluminum diamond plate
alumetals Supply is well-known for its extensive color selection for polyester Hot sale factory price aluminum checker plate aluminum diamond plate and coil. We have over 35 stock polyester paint colors
View Details
3/8 aluminum checker plate
New | aluminum diamond plate
Buy 3/8 aluminum checker plate and other metal working products online at aluminummetals.com.
View Details
4 x 10 aluminum diamond plate
New | aluminum diamond plate
alumetals Supply is well-known for its extensive color selection for polyester 4 x 10 aluminum diamond plate and coil. We have over 35 stock polyester paint colors
View Details
24x24 aluminum diamond plate
New | aluminum diamond plate
View our inventory below to find the 24x24 aluminum diamond plate and plate you need, or use the filters at left to narrow your search.
View Details
Contact Details
Email:alu@haomeicn.com
Email:wade@haomeicn.com
Tel (86) 371-6562-1391Fax (86) 371-6562-1393
web:aluminummetals.com
SOCIAL MEDIA