3 Items in your cart 
5052 marine alloy
-1963 items in stock
Find 5052 marine alloy. Check out 1000+ Results from Across the Web
More DetailsProduct Information
| Name | 5052 marine alloy |
| Alloy | 5083 |
| Temper | H16, H18. H24. H26. H28 |
| Thickness | From 0.013mm to 1mm |
| Width | Standard width 1240mm, 1270MM |
| Special width 1000mm. 1200mm. 1240mm, 1270mm. 1520mm. 1620mm | |
| Diameter | Standard dia: 1200mm |
| Interior dia: 150mm.405mm. 500mm. 505mm. 510mm | |
| Outer diameter: 1200mm | |
| Weight | 2.5 T/coil,3.0 T/coil |
| Coating thickness | PE:>=16 micron , PVDF:>=25 micron |
| Protective film | As per customer's request |
| Coating paint | PVDF, PE(Polyester), epoxy, polyamide, polyurethane |
| Color | Soid. metallic, high gloss.stone.timber.brush.mirror.sparkling, RAL or by customer requirements. |
| Weight | As per customer's request |
| Surface | Embossed, mill finish, coated |
| Gloss | 10-100% |
| Coating Hardness (pencil resistance) |
More than 2h |
| Coating adhesion | 1J |
| Impact Resistance | No peeling or cracking(50 kg/cm) |
| Application | ACP.wall cladding.facades.roofs and canopies.ceilings.signboards. blind window.display platforms.electrical panels.etc |
| Coating Thickness | PE coating:more than 16 micron |
| PVDF coating:more than 25micron |
5052 marine alloy have higher strength than 5052 plate and has exceptional thermal conductivity. In the tempered condition, it retains good formability due to excellent ductility. It is highly suitable for welding and can be hardened by cold work. Because Alloy 5083 exhibits excellent resistance to general corrosion, it is used in marine applications. Since Alloy 5083 is capable of withstanding extremely low temperatures without brittleness or loss of properties, it is especially suited to the cryogenic market. Alloy 5083 has been used in vehicle armor plate due to its high strength factor.
| Element | % Present |
| Si | 0.4 |
| Fe | 0.4 |
| Cu | 0.1 |
| Mn | 0.4-1.0 |
| Mg | 4.0-4.9 |
| Zn | 0.25 |
| Ti | 0.15 |
| Cr | 0.05-0.25 |
| Al | Balance |
| BS EN 485-2:2008 Sheet 0.2 - 6.3mm Thick |
|
| Property | Value |
| Proof Stress | 125 Min MPa |
| Tensile Strength | 275 - 350 MPa |
| Hardness Brinell | 75 HB |
Tag
5052 marine alloy,5052,marine,alloy
5083 aluminum for sale
New | aluminium alloy 5083
5083 aluminum for sale, 5 mm, 6.5 mm, aluminium sheet metal, quintet, warded plate, bulb plate, it is possible to cut it to your desired size , 450x450mm
View Details
Contact Details
Email:alu@haomeicn.com
Email:wade@haomeicn.com
Tel (86) 371-6562-1391Fax (86) 371-6562-1393
web:aluminummetals.com
SOCIAL MEDIA